Menu
W19 PRO Product Instruction
Product parameters (W19 PRO)
| Product name | Reverse Osmosis Hydrogen Rich Water Purifier Dispenser | |
| Product model | W19 (Pro) | W19 (Pro) |
| Rated voltage/frequency | 110V~ / 60Hz | 220V~ / 50Hz |
| Rated power | 1500W | 2200W |
| Rated heating power | 1400W | 2100W |
| Electrical power consumption | 0.1kW/24h | |
| Water heating capacity | 18L/h (≥90°C) | 18L/h (≥90°C) |
| Water production flow | 30L/h | |
| Working pressure | 0.4~0.8MPa | |
| Applicable water source | City water | |
| Applicable water temperature | 5-38°C | |
| Water tank capacity | 6L/2.5L | |
| Net weight | 11 kg | |
| Dimensions | 475x240x430mm | |
Schematic diagram of products
Product function introduction
- The key is used to power on and off the water purifier. Long press the key for 2 seconds under standby mode, the purifier will switch into power-on mode. Long press the key for 2 seconds under power-on mode, the purifier will switch into standby mode.
- The key is used to clean the internal waterways and water tanks and drain the stored water. This function is recommended for initial use, after filter element replacement and restart using after unused for a long time. Long press the key of “Intelligent Clean” under power-on mode to start the automatic clean, and the whole process will take 6 minutes.
- These indicators are used to suggest the life of the filter element. White indicator is to suggested that the status of filter element is normal. Orange indicator is to suggested that 80% of filter element have been consumed. Red indicator is on suggested that the filter element life have been expired and it should be replaced.
- Press the reset key after the filter element has been replaced to restart counting the life of the new filter element. Long press the reset key for 3 seconds under power-on mode, instantly press the key to choose the filter element which service life needs to reset, long press the key again thus the filter element replacement has been completed.
- It indicates the working state of the water purification system of the water purifier. The indicator is on means it’s during the process of water making. The indicator flashes means that filter element has been washing. After the completion of these processes, the indicator will be off.
- Fresh Water indicator is on means that the original water tank is in lack of water, which reminds user to replace water in the original water tank and pour out the water in the concentrated water tank.
- No Water indicator is on means the built-in pure water tank is in lack of water, and you cannot get water at this time that you need to wait for water production. No Water indicator is on means that the built-in hydrogen-rich pure water tank is lack of water, please add bottled pure water in the hydrogen-rich pure water tank (the built-in small water tank)
- The key is used to prevent scalding. If you want to take “coffee, green tea, boiled water” or get hot water and warm water, you need to press the child lock key firstly before pressing the corresponding water temperature.
- You can get quantitative water of 150ml. First press “small cup” key and then choose the corresponding water temperature.
- You can get quantitative water of 300ml. First press “big cup” key and then choose the corresponding water temperature.
- Press “Coffee” to get water with temperature between 82-86°C.
- Press “Tea” to get water with temperature between 88-92°C.
- Press “Hot” to get water with temperature between ≥90°C
- Press “Normal” to get water with temperature between 10-30°C.
- Press “Warm” to get water with temperature between 38-55°C.
- Press “Milk” to get water with temperature between 45-48°C.
Operation guideline
Step 1: Place water purifier in flat place such as desktop or cabinet countertop;
Step 2: Remove the water tank, fill the raw water tank with fresh tap water, and install the water tank on the purifier and close the lid of the water tank;
Step 3: Press the snap-fit on the top and the top lid will pop up. Open the lid of pure water tank, add bottled pure water in the hydrogen-rich pure water tank, cover the lid of the pure water tank, and then install its top lid; (Note: It is strictly forbidden to add tap water, mineral water and filtered water in the hydrogen-rich pure water tank.
Step 4: Plug in the purifier to power on the electricity. Long press the power key for 2 seconds to start the purifier;
Step 5: To achieve excellent water with great quality, it is recommended to clean the purifier manually after long press the “Wash” for 3 seconds. Place a water container at the outlet (e.g.: Bucket, etc.).
After 6 minutes, you can operate the purifier for daily use;
Step 6: After the cleaning process, the water tank should be emptied and re-added of tap water. The water purifier will start to make water automatically. After the water making is completed, it can be used normally.
Daily use
When the machine displays” CO₂”, it indicates the need to replace the gas cylinder.
1. Press “Normal” “Warm” “Milk” and other keys;
2. Touch “Water Out” again to directly discharge water;
1. Press “Lock” unlock;
2. Press “Coffee” “Tea” “Hot” and other keys;
3. Touch “Water Out” again to directly discharge water;
1. Press “Normal” “Warm” “Milk” “Coffee” “Tea” “Hot” and other keys, (If you need to “Coffee” “Tea” “Hot”, you need to touch the “lock” to unlock);
2. If you touch the “small cup” and “Big cup” keys, the cup of water corresponding to the water temperature will be output;
3. Touch “Water Out” again to directly discharge water;
Notice:
(1)The dispenser is set with quantitative water-out protection, and the water-out is automatically stopped after more than 1000ml of water came out.
(2)When taking hot water, do not stretch your arms below the outlet in case of scalding.
(3)To prevent dry burning, please flow out some normal temperature water before the first time of dispenser powering and hot water getting.
When the water comes out, you can press any temperature key to stop the water.
Manual Setting Temperature Mode
Long press “boiling water” for 3 seconds, the dispenser enters the temperature regulation mode, digital tube displays“95”. Press “big” to reduce the temperature for 1 degree, and press “big” to raise the temperature for 1 degree. The lowest adjustable degree is 85 degrees. After getting to the desired temperature, no operation for 5 seconds will indicate the prior setting has been completed successfully.
Replacement of filter element
Step 1: Turn off the power and take out the old filter element (① ②)
Step 2: Installation of new filter element (③ ④)
Press the “Push” button pops to open the head cover of the machine automatically;
Rotate the filter element counterclockwise and take it out upward;
Assemble the new filter element and rotate it clockwise to tighten it;
Press and hold “RESET” and then touch “RESET” to select the corresponding filter element.
Press and hold “RESET” for 3s to complete resetting.
Note: Original filter element must be used for replacement to ensure the safety of drinking water. For any abnormal situation during the replacement of filter element, please contact the customer service center in time.
Function of filter element
| Filter element for short | Type of filter element | Function | Recommended replacement period |
| PAC | Folding PP cotton activated carbon rod composite filter | Removal of impurities such as silt, rust, sand, suspended solid and blood worm; removal of residual chlorine and absorption of disagreeable tastes and odors. | 6-12 months |
| RO | Reverse osmosis filter element | Filter precision of 0.0001 μm, removal of incrustation and heavy metal | 12-24 months |
| CF | Rear composite carbon rod | Further increase the taste | 6-12 months |
OLANSI
OLANSI HEALTHCARE CO.,LTD
© Olansi Healthcare Co.,Ltd • All Rights Reserved.
