Menu
How to Use Terahertz Magnetic Energy Health Equipment
1. Product parameters
| Product name | Terahertz Magnetic Energy Device |
| Product model | P5 |
| Adapter output | 15V 2A |
| Rated power | 28W |
| Battery | 11.1V, 2600mAh |
| Product size | 240x240x53mm |
2. Introduction to user interface
Before first use, connect the adapter to the machine and plug it into a 220V power supply. Charge until the battery status indicator turns white, then follow the functional operation instructions.
Power off: ➀ key stays red for a long time, or all the display lights are off.
Power on→ Press and hold “ ➀ ” for 2 seconds
Power on after hearing a “beep” sound, and the power indicator is green.The default startup mode is “IR”. The icon of this function is fully lit, and the icons of other functions are half lit.
Machine wake-up→ Press and hold any key
When the display screen of the machine is completely off, press and hold any key for a long time to wake up the machine, and the power light turns on from off.
Mode switch→ Short press “ ➁ ” mode key
Short press“ ➁” to switch “IR/Food/Drink/⑪ /CES” mode in turn; the selected mode indicator is fully lit. After 3 seconds, if there is no operation, the mode key will be half lit. (When the machine is working, press the“ ➂” pause key to select the mode.)
Start /Pause→ Short press “ ➂ ” start / pause key
After selecting the corresponding mode, press the“ ➂ ” start / pause key. At this time, the key light is fully lit, and the whole machine starts to work in this mode. Press the“ ➂ ” key again, the whole machine stops working, and the Indicator light is half lit. If the“ ➂ ” key is not pressed within 2 minutes, the product will shut down automatically.
Intensity adjustment→ Short press “+” / “—”
Press the “+” or “—” key to adjust the working intensity gear:
Under the “IR/Food/Drink/⑪ /CES” mode, it can be adjusted in 4 gears (01/02/03/04), 01 is the lowest and 04 is the strongest;
Under the CES mode, it can be adjusted in 20 gears (01/02/03/04/.. /20): without pressing the “+” or “—” key, the default strength is 01 for the lowest and 20 for the highest ;
Press the “+” or “—” key to increase or decrease the intensity gradually. After reaching the highest gear or the lowest gear, continue to press the “+” or “—” key to maintain the highest gear or the lowest gear.
The white light will be fully lit after each press, and half lit after 3 seconds.
3. Functional operation instructions
- 3.1 Battery only power mode (not plugged in)
| Battery only power mode (not plugged in) | ||
| Function | Operation | Instructions |
| Timing setting | Short press “ ⑥ ” timing key | Press the“ ⑥ ” timing key to set the running time: 1. “IR” /“ ⑪” / “CES” mode runs for 15 minutes by default. After operation, the indicator light is fully white and becomes half bright after 3s; Each time the“⑥” timing key is pressed, the time is automatically increased by 5 min, up to 60 min. 2. “Food”/ “Drink” mode runs for 30 minutes by default. Each time the“ ⑥ ” timing key is pressed, the running time changes to 1 hour / 3 hours / 6 hours in turn. (When the machine is working, press the “③” pause key to reset the timing.) |
| Set the child lock | Short press“⑦” to lock | Press the“⑦” child lock key, the indicator light will be highlighted, and all keys will be locked. |
| Press“⑦” +”②” at the same time for 5s to unlock | Press the“⑦” +”②”at the same time for 5s to unlock. After unlocking, the light of “⑦” unlock key is half lit. | |
| Other instructions | During running: 1) Press the“+” or “—” key to adjust the intensity when it is not locked. If you want to reset the mode and time, you must short press the“ ③” pause key (the“③” light turns half on) to stop the product from running, and then reset the mode and time; 2) Press the“ ③” pause key when it is not locked, the countdown stops, and the nixie tube displays the remaining time; press the“③” start key to continue running. When the machine is paused, press “② ” / “⑥ ” / “+” / “—” to enter the corresponding setting. 3) When the running time is over, the nixie tube displays 00:00. If the “ ③” start key is not pressed within 2 minutes, the product will automatically power off. | |
- 3.2 Adapter power mode (plugged in)
Adapter power mode (plugged in)
In power off state
1)When not charging, the “ ⚡” battery indicator light is off;
2)During charging, the “ ⚡” battery indicator flashes white;
3)When the battery is fully charged, the “ ⚡” battery indicator light display white for a long time, and the white light is off when the charging cable is unplugged;
In power on state
1)When not charging, the “ ⚡” battery indicator is off, indicating that the battery is sufficient; 2)The “ ⚡” battery indicator is orange, indicating that the battery is low, please prepare to charge;
3)The “ ⚡” battery indicator is red, indicating that the battery is out of power. Please charge immediately.
Functional mode
| Mode | Operation | Instructions |
| ⑧ IR | After the machine is turned on: 1) Short press “② ” key to switch mode; 2) After selecting the mode of “⑧ IR” / “⑨ Food” / “⑩ Drink” and “⑪ ”, short press the “ +” or “ —” key to adjust the working intensity gear, (under the mode of “⑧ IR” / “⑨ Food” / “⑩ Drink” and “⑪ ”, 4 gears (01/02/03/04) can be adjusted (01 is the lowest and 04 is the strongest.) 3) Short press the “ ⑥” timing key to set the working time; 4) Short press the “ ⑦” key to open the child lock; 5) Short press “③ ” key to start or pause mode |
It consists of four parts, including terahertz chip, graphene, high magnetism and low frequency, and produces different energies. |
| ⑨ Food | High magnetism + low frequency can resonate fruits and vegetables, change the taste, and effectively reduce pesticide and fertilizer hormone residues by more than 85%. | |
| ⑩ Drink | Terahertz can resonate purify water, mineral water, pure water, barreled water, milk and other alcoholic products. The conventional drink can resonate for 30 minutes or 1 hour. | |
| ⑪ | Prove the existence of energy. Polar rotation test method: 1) Regardless of the material of the cup (except metal cups), the thickness of the cup bottom must not exceed 1cm. 2) Cups must have flat bottoms. 3) The cup shall be placed in the middle of the faceplate. 4) Before starting, the rotor must be kept in the middle of the cup bottom. 5) Fill the cup with water, put the rotor in the middle of the bottom of the cup, and then start the “ ⑪ ” and “ ③” keys. 6) The single working time of polar rotation is 5 minutes. |
|
| ⑫ CES | After the machine is turned on: 1) Short press “② ” key to switch mode; 2) After selecting the “CES” mode, short press the “+ ” or “ —” key to adjust the working intensity gear, (under the “CES” mode, 20 gears can be adjusted. If you do not press the “+ ” or “ —” key, the default intensity is 01 as the lowest gear and 20 as the strongest gear; 3) Short press the “ ⑥” timing key to set the working time; 4) Short press the “ ⑦” key to open the child lock; 5) Short press “③ ” key to start or pause mode |
Alleviate anxiety and depression; Improve sleep; Alleviate pain. |
- 3.3 Instructions for wearing in CES mode
1. Take out the ear clip wire and plug it in the machine;
2. Set the timing, child lock and intensity gear;
3. Clamp the ear with the ear clip wire and wear it well to enjoy the CES micro-current mode;
4. Machine Maintenance
Regular cleaning and maintenance of equipment
1. Please unplug the power cord and the ear clip wire from the socket and store them properly before maintenance.
2. During general maintenance, the body can be wiped with a soft dry cloth, do not use rough objects such as scouring pad, steel brush, etc. to avoid damage to the surface of the body.
3. If there is dirt, you can use a clean soft cloth with a little water to wipe it. Do not wash it directly with water or brush it in water.
5. Troubleshooting
| Fault code | Fault instruction | Troubleshooting |
| E1 | NTC failure (Open or short circuit) | Stop the machine for half an hour, plug it in and use it again. If the fault is still not removed, please contact the after-sales service. |
| E2 | Communication abnormality | Stop the machine for half an hour, plug it in and use it again. If the fault is still not removed, please contact the after-sales service. |
More Posts
Table of Contents
Send Us A Message
OLANSI
OLANSI HEALTHCARE CO.,LTD
© Olansi Healthcare Co.,Ltd • All Rights Reserved.
